NL120B baging film is a multi-layer polyolefin film for wider vacuumbag applications. It is suitable for the process where the cure temperature does not exceed 121°C such as resin infusion and wet lay-up.
TECHNICAL DATA SHEET
- Ease of use for bagging large parts.
- Reduce the operational cost because of inexpansive film.
- No risk of bag failure due to leak at film seam
|Maximum use temperature
||Mutilayer , (Polyolefin+PA)
|Elongation (ASTM D882-12)
|| >300 %
|Tensile Strenght (ASTM D882-12)
|| > 40 Mpa
||0.9~ 1.05 g/m3
||65 & 75 μm
|| Phenolics / Strong Oxider
|| Unlimited at 22°C
The maximum Use temperature is dependent upon the time duration used at maximum temperature and is process explicit, it recommends testing before use.